Copper Tube & Copper Fittings
Farmer’s Copper Ltd. maintains an extensive inventory of C12200 (DHP) copper tube and copper solder joint fittings. C122 is commercially pure copper, which has been deoxidized with phosphorus, leaving relatively high residual phosphorus content. Copper alloy 122 is not susceptible to hydrogen embrittlement, but has relatively low electrical conductivity due to the amount of phosphorous content.
Typical Applications
- Hydraulic lines
- Oil lines
- Heat Exchanger tubes
- Water lines
- Steam lines
- Distiller & Dairy tubes
- Medical Gas-oxygen lines
In addition to C12200 Copper tube, we stock ANSI B16.22 wrought copper solder joint fittings. Sizes 1/8” nom. thru 6” nom. for Type “K”, “L” & “M” copper tubes.
Contact one of our professional sales staff today, to learn how we can help solve your copper tube and fitting requirements.
Standard Stock Sizes
*Type “K” (Hard) 1/8” thru 6”, (Soft) ¼” thru 1”
* Type “L” (Hard) ¼” thru 6”, (Soft) ¼” thru 1”
*Type “M” (Hard) ½” thru 6”
*DWV 1” thru 6”
*Type “K” (clean & capped) ¼” thru 3”
*Type “L” (ACR) ¼” thru 3”
*Refrigeration (Soft) 1/8” thru ¾”OD
*ASTM B68 (Soft) 1/8”OD x (.035”), 3/16”OD x (.035”)
(.065”), ¼”OD x (.035”) (.049”) (.065”), 5/16”OD x (.065”), 3/8”OD x
(.035”)(.049”)(.065”), ½”OD x (.035”)(.049”)(.065”)
*PVC coated tube – ¼”OD, 3/8”OD, ½”OD
*ASTM B111/SB111 Condenser Tubes – ½”OD x .065”wall, 5/8”OD
x .065”wall, ¾”OD x .065”wall, 1”OD x .065”wall
*ASTM B75-Light Drawn Temper for instrumentation and steam
tracing applications
|
Cu |
P |
---|---|---|
Min./Max. |
99.9 min |
.015-.040 |
Nominal |
- |
.02 |