C61400 Aluminum Bronze
ASTM B171, ASTM B150, ASME SB169, SB171, SB150, QQ-C-465
C61400 aluminum bronze is selected when high strength, wear resistance, and corrosion performance take priority in demanding service conditions. The aluminum content enhances mechanical properties, allowing this alloy to perform well under load while maintaining stability in aggressive industrial environments.
At Farmers Copper LTD, we supply C61400 aluminum bronze alloy plate and sheet for components exposed to friction, impact, and corrosive media. Aluminum bronze plate and sheet are commonly used in heavy-duty industrial parts, wear plates, and structural elements where long service life and material integrity support operational reliability.
Established in 1920, Farmer’s Copper Ltd. prides itself on customer satisfaction. Call one of our knowledgeable sales teams today to inquire about your aluminum bronze needs.
Standard C61400 Sizes
- Rod: ½” Dia. thru 4”
- Sheet: .064”, .125”
- Plate: 3/16” thick thru 3”
C61400 Aluminum Bronze Applications
- Bushings
- Bearings
- Gear parts
- Ship-building
- Fasteners
Explore Other Alloys
Jump directly to the page you are looking for by entering a query below.
Suggested Searches:
If you need alloys, we're all you need.
Our C61400 Aluminum Bronze Inventory & Properties
Farmer’s diverse inventory of products and services offered provides our customers the largest and most extensive selection of alloys available, cut to precise specifications, and delivered with total quality control.
Chemical Properties
| Element | Cu (1,2) | Pb | Zn | Fe | P | Al | Mn |
| Min % | 1.5 | 6 | |||||
| Max % | Rem | 0.01 | 0.2 | 3.5 | 0.015 | 8 | 1 |
Physical Properties
| Melting Point – Liquidus ⁰F | 1915 | |
| Melting Point – Solidus ⁰F | 1905 | |
| Density lb/cu in. at 68⁰F | 0.285 | |
| Specific Gravity | 7.89 | |
| Electrical Conductivity % IACS at 68⁰F | 14 | |
| Thermal Conductivity Btu/sq ft/ft hr/ ⁰F at 68⁰F | 39 | |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-572 ⁰F) | 9 | |
| Specific Heat Capacity Btu/lb/⁰F @ 68 ⁰F | 0.09 | |
| Modulus of Elasticity in Tension ksi | 17000 | |
| Modulus of Rigidity ksi | 6400 |
Fabrication Properties
| TECHNIQUE | SUITABILTY | |
| Soldering | Not Recommended | |
| Brazing | Fair | |
| Oxyacetylene Welding | Not Recommended | |
| Gas Shielded Arc Welding | Good | |
| Coated Metal Arc Welding | Good | |
| Spot Weld | Good | |
| Seam Weld | Good | |
| Butt Weld | Good | |
| Capacity for Being Cold Formed | Good | |
| Capacity for Being Hot Formed | Good | |
| Machinability Rating | 20 | |
Mechanical Properties
| FORM | TEMPER | TENSILE STRENGTH | YS-0.2% OFFSET | YS-0.5% EXT (KSI) | ELONGATION (%) | ROCKWELL (B) | ROCKWELL (F) | ROCKWELL (30T) | TORSION MODULUS (KSI) | FATIGUE STRENGTH | SECTION SIZE (IN) |
| PLATE SHEET STRIP | H04 | 89 | 60 | 32 | 87 | 0.125 | |||||
| H04 | 85 | 58 | 35 | 86 | 0.312 | ||||||
| H04 | 78 | 45 | 40 | 84 | 1 | ||||||
| H04 | 80 | 54 | 38 | 85 | 48 | 0.5 | |||||
| O60 | 80 | 40 | 40 | 42 | 0.315 | ||||||
| O60 | 80 | 40 | 40 | 83 | 42 | 26 | 0.312 | ||||
| O60 | 82 | 45 | 40 | 84 | 45 | . | 30 | 0.125 | |||
| O60 | 82 | 45 | 40 | 45 | 0.118 | ||||||
| O60 | 76 | 33 | 45 | 81 | 28 | 40 | 1 | ||||
| O60 | 78 | 35 | 42 | 40 | 0.59 | ||||||
| O60 | 78 | 35 | 42 | 82 | 40 | 25 | 0.5 | ||||
| ROUND BAR ROD | HR50 | 75 | 35 | 30 | 1 | ||||||
| HR50 | 80 | 40 | 30 | 0.5 | |||||||
| HR50 | 70 | 32 | 30 | 2 | |||||||
| H04 | 85 | 45 | 35 | 91 | 48 | 0.5 | |||||
| H04 | 82 | 40 | 35 | 90 | 45 | 1 | |||||
| H04 | 80 | 35 | 35 | 88 | 40 | 6.1 | 60 | 26 | 2 |
Our Commitment to Service
As a leading copper, brass, & bronze alloys supplier, Farmers Copper Ltd. attributes our success to serving our customers, through our service-minded employees and material readily available for prompt, accurate deliveries of copper, brass, bronze, stainless steel and other metal alloys.