C95500 Nickel Aluminum Bronze
ASTM B171, ASTM B150, ASTM B505, AMS 4640, AMS 4880, ASME SB171, ASME SB150, QQ-C-465, ASTM B271/B271M, SAE J461, SAE J462, ASTM B148, ASTM B763/B763M, ASTM B30, ASTM B806
Farmer’s Copper Ltd. carries an extensive inventory of nickel aluminum bronze C63000 (AMS 4640) and the C95500 nickel aluminum bronze bar. C630 is a special high-strength aluminum bronze used in applications involving heavy loads, friction, and abrasive wear and corrosion. The addition of nickel to C95500 nickel aluminum bronze increases the strength of the alloy without reducing its excellent ductility, toughness, and good wear resistance.
Farmer’s Copper Ltd., strives to achieve the goals set by our customers. Call us today to inquire about your C95500 nickel aluminum bronze needs at (409) 765-9003!
Standard Shapes & Sizes for C95500
- Round Bar – 3/8” Dia. thru 10”
- Plate – 3/8” thick thru 1-1/2”
C95500 Nickel Aluminum Bronze Applications
- Aircraft parts
- Valve parts
- Chemical processing components
- Steam servicing
- Builders hardware
- Electrical
- Fasteners
- Industrial
- Marine
Industries
Farmer’s Copper Ltd. extends its services throughout many industries. We provide the raw copper alloy materials in various standard shapes as well as custom cut copper alloys.
Explore Other Alloys
Jump directly to the page you are looking for by entering a query below.
Suggested Searches:
If you need alloys, we're all you need.
Our C95500 Nickel Aluminum Bronze Inventory & Properties
Farmer’s diverse inventory of products and services offered provides our customers the largest and most extensive selection of alloys available, cut to precise specifications, and delivered with total quality control.
Fabrication Properties
| Technique | Suitability | |
| Soldering | Good | |
| Brazing | Fair | |
| Oxyacetylene Welding | Not Recommended | |
| Gas Shielded Arc Welding | Good | |
| Coated Metal Arc Welding | Good | |
| Spot Weld | Good | |
| Seam Weld | Good | |
| Butt Weld | Good | |
| Capacity for Being Cold Worked | Poor | |
| Capacity for Being Hot Formed | Good | |
| Forgeability Rating | 75 | |
| Machinability Rating | 20 |
Plate & Sheet
- ASTM Standard Designation for C63000: ASTM B171
- ASME Standard Designation for C63000: ASME SB171
Rod
- ASTM Standard Designation for C63000: ASTM B150
- ASME Standard Designation for C63000: ASME SB150
- AMS Standard Designation for C63000: AMS 4640
- Federal Specifications for C63000: QQ-C-465
Chemical Composition
(%max., unless shown as range or min.)| Cu(1) | Al | Fe | Mn | Ni(2) | Si | Sn | Zn | |
| Min./Max. | Rem. | 9.0-11.0 | 2.0-4.0 | 1.5 | 4.0-5.5 | .25 | .20 | .30 |
| Nominal | 82.0 | 10.0 | 3.0 | - | 5.0 | - | - | - |
Mechanical Properties
| Form | Temper | Temper Code | Tensile Strength (ksi) | YS-0.5% Ext (ksi) | Elongation (%) | Rockwell B scale | Brinell Hardness, 3000 kg load | Shear Strength (ksi) | Izod (ft-lbs) | Charpy V-Notch Impact Strength (ft-lbs) | Compressive Strength .1 in. set/in. (ksi) | Creep Strength (0.1% per 10,000 hours) (ksi) | Fatigue Strength** (ksi) | Proportional Limit (ksi) |
| As Centrifugal Cast | As Centrifugal Cast | M02 | 90 Min for Standard 90 Min for Standard | 40 Min for Standard 40 Min for Standard | 6 Min for Standard 6 Min for Standard | 190 Min for Standard | ||||||||
| Quenched Hardened and Temper Annealed | TQ50 | 110 Min for Standard 110 Min for Standard | 60 Min for Standard 60 Min for Standard | 5 Min for Standard 5 Min for Standard | 200 Min for Standard | |||||||||
| As Continuous Cast | As Continuous Cast | M07 | 95 Min for Standard 95 Min for Standard | 42 Min for Standard 42 Min for Standard | 10 Min for Standard 10 Min for Standard | |||||||||
| Quenched Hardened and Temper Annealed | TQ50 | 110 Min for Standard 110 Min for Standard | 62 Min for Standard 62 Min for Standard | 8 Min for Standard 8 Min for Standard | ||||||||||
| Quenched Hardened and Temper Annealed | Quenched Hardened and Temper Annealed | M05 | 110 Min for Standard | 60 Min for Standard | 5 Min for Standard | |||||||||
| As Sand Cast | As Sand Cast | M05 | 90 Min for Standard 90 Min for Standard 100 Typ | 40 Min for Standard 40 Min for Standard 44 Typ | 6 Min for Standard 6 Min for Standard 12 Typ | 87 Typ | 190 Min for Standard 195 Typ 4 | 48 Typ | 13 Typ | 10 Typ | 120 Typ | 11 Typ 3 Typ 6 Typ | 31 Typ 2 | 28 Typ |
| Quenched Hardened and Temper Annealed | TQ50 | 110 Min for Standard 110 Min for Standard 120 Typ | 60 Min for Standard 60 Min for Standard 68 Typ | 5 Min for Standard 5 Min for Standard 10 Typ | 200 Min for Standard 230 Typ | 70 Typ | 15 Typ | 150 Typ | 38 Typ | 45 Typ | ||||
Our Commitment to Service
As a leading copper, brass, & bronze alloys supplier, Farmers Copper Ltd. attributes our success to serving our customers, through our service-minded employees and material readily available for prompt, accurate deliveries of copper, brass, bronze, stainless steel and other metal alloys.